I have succesfully updated bulletins, but seem manual.

Both .ASC and .CFG have to be updated by hand. And .ASC seems to
use Control-A codes, that I'm not familiar with. But was able to
copy and reuse most that were in the original file.

Am I making this process more difficult than it is ? Is there a way
to auto-generate the menu (.asc) from the file slisted in the .cfg file?

Are there other bulletin tools that automate this?

Trying to learn. I have been referring to

---
þ Synchronet þ Too Lazy BBS - Sit back and read and playgames - toolazy.ddns.net:2323 or SSH
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: Bullseye Bulletin
By: Amessyroom to All on Mon Jul 01 2024 09:01 pm

Both .ASC and .CFG have to be updated by hand. And .ASC seems to use Control-A codes, that I'm not familiar with. But was able to copy and reuse most that were in the original file.

Am I making this process more difficult than it is ? Is there a way to auto-generate the menu (.asc) from the file slisted in the .cfg file?

Are there other bulletin tools that automate this?

I haven't seen anyhing to auto-generate the bulletin menu. For that, and the .asc files with Ctrl-A codes, normally what I do is use an ANSI editor and then convert it to Ctrl-A codes using ans2asc (which is a tool that comes with Synchronet).

Nightfox

---
þ Synchronet þ Digital Distortion: digitaldistortionbbs.com
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: Bullseye Bulletin
By: Amessyroom to All on Mon Jul 01 2024 09:01 pm

I have succesfully updated bulletins, but seem manual.

Both .ASC and .CFG have to be updated by hand. And .ASC seems to
use Control-A codes, that I'm not familiar with. But was able to
copy and reuse most that were in the original file.

That's correct. There are tools (e.g. PabloDraw) that can save to Ctrl-A format files (.msg, .asc) directly.

Am I making this process more difficult than it is ? Is there a way
to auto-generate the menu (.asc) from the file slisted in the .cfg file?

No, not with Bullsye! Bulletins which is a *very* simple (and old) script.

Are there other bulletin tools that automate this?

Take a look at echicken's bulletins module at xtrn/bullshit/*.

Trying to learn. I have been referring to

... ? The last part of your message was cut-off, it appears.
--
digital man (rob)

Sling Blade quote #3:
Karl (re: killing Doyle): That second one just plum near cut his head in two. Norco, CA WX: 76.4øF, 64.0% humidity, 3 mph WNW wind, 0.00 inches rain/24hrs --- SBBSecho 3.20-Linux
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Nightfox wrote to Amessyroom <=-

Re: Bullseye Bulletin
By: Amessyroom to All on Mon Jul 01 2024 09:01 pm

Both .ASC and .CFG have to be updated by hand. And .ASC seems to use Control-A codes, that I'm not familiar with. But was able to copy and reuse most that were in the original file.

Am I making this process more difficult than it is ? Is there a way to auto-generate the menu (.asc) from the file slisted in the .cfg file?

Are there other bulletin tools that automate this?

I haven't seen anyhing to auto-generate the bulletin menu. For
that, and the .asc files with Ctrl-A codes, normally what I do is
use an ANSI editor and then convert it to Ctrl-A codes using
ans2asc (which is a tool that comes with Synchronet).

Agree and that's how I do it too. The ans2asc utility is documented on
the Wiki.



... Bug free, cheap, on time, works. Pick two.
--- MultiMail/Linux v0.52
þ Synchronet þ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

No, not with Bullsye! Bulletins which is a *very* simple (and old) script.

Take a look at echicken's bulletins module at xtrn/bullshit/*.

Thanks I will check it out.

... ? The last part of your message was cut-off, it appears.
--

Yes. I was intending on pasting the wiki link I had read for bullseye, LOL but it exited the editor instead of pasting.
--- SBBSecho 3.20-Linux
* Origin: Too Lazy BBS - toolazy.ddns.net:2323 (1:3634/58)

Re: Bullseye Bulletin
By: Digital Man to Amessyroom on Tue Jul 02 2024 10:25 am

Am I making this process more difficult than it is ? Is there a way
to auto-generate the menu (.asc) from the file slisted in the .cfg file?

No, not with Bullsye! Bulletins which is a *very* simple (and old) script.

I updated bullseye.js to auto-generate the list of bulletins if the menu file doesn't exist. There are other minor improvements as well, with logging and error handling, but that's about it (now v3.00).
--
digital man (rob)

Synchronet/BBS Terminology Definition #61:
PETSCII = PET Standard Code of Information Interchange (a.k.a. CBM ASCII) Norco, CA WX: 88.4øF, 42.0% humidity, 4 mph W wind, 0.00 inches rain/24hrs
--- SBBSecho 3.20-Linux
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: Bullseye Bulletin
By: Granville Errol Casey, Jr to Digital Man on Tue Jul 02 2024 04:17 pm

Yes. I was intending on pasting the wiki link I had read for bullseye, LOL but it exited the editor instead of pasting.

It happens. :-)
--
digital man (rob)

Synchronet/BBS Terminology Definition #32:
FOSSIL = Fido/Opus/SEAdog Standard Interface Layer
Norco, CA WX: 88.4øF, 42.0% humidity, 4 mph W wind, 0.00 inches rain/24hrs
--- SBBSecho 3.20-Linux
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)