Hello Andrew!

Just compiled .20 but if anything getting even more warning reports of problems
during gcc v8.4 compiles.

I thought these was solved ?

o/p from build.err when using make > build.log 2>build.err

Warning this is a long listing :(


----

m_ticarea.c:924:4: warning: ‘strncpy’ output may be truncated copying 5 bytes from a string of length 5 [-Wstringop-truncation]
strncpy(tic.Convert, fgroup.Convert, 5);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
m_ticarea.c:925:4: warning: ‘strncpy’ output may be truncated copying 14 bytes from a string of length 14 [-Wstringop-truncation]
strncpy(tic.Banner, fgroup.Banner, 14);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
m_ticarea.c: In function ‘EditTicarea’:
m_ticarea.c:1048:40: warning: ‘%-40s’ directive output may be truncated writing between 40 and 55 bytes into a region of size between 46 and 54 [-Wformat-truncation=]
snprintf(temp, 81, "%3d. %-20s %-40s", o + i, tic.Name, tic.
^~~~~ ~~~~
Comment);
~~~~~~~
m_ticarea.c:1048:8: note: ‘snprintf’ output between 68 and 91 bytes into a destination of size 81
snprintf(temp, 81, "%3d. %-20s %-40s", o + i, tic.Name, tic.
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Comment);
~~~~~~~~
m_ticarea.c: In function ‘PickTicarea’:
m_ticarea.c:1159:39: warning: ‘%-40s’ directive output may be truncated writing between 40 and 55 bytes into a region of size between 46 and 54 [-Wformat-truncation=]
snprintf(temp, 81, "%3d. %-20s %-40s", o + i, tic.Name, tic.Comment);
^~~~~ ~~~~~~~~~~~ m_ticarea.c:1159:7: note: ‘snprintf’ output between 68 and 91 bytes into a destination of size 81
snprintf(temp, 81, "%3d. %-20s %-40s", o + i, tic.Name, tic.Comment);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ledit.c: In function ‘show_aka’:
ledit.c:2133:35: warning: ‘%s’ directive output may be truncated writing up
to 12 bytes into a region of size between 0 and 16 [-Wformat-truncation=]
snprintf(temp, 24, "%d:%d/%d.%d@%s", aka.zone, aka.net, aka.node, aka.point,
aka.domain);
^~
~~~~~~~~~~
ledit.c:2133:3: note: ‘snprintf’ output between 9 and 37 bytes into a destination of size 24
snprintf(temp, 24, "%d:%d/%d.%d@%s", aka.zone, aka.net, aka.node, aka.point,
aka.domain);

^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~
ledit.c:2131:32: warning: ‘%s’ directive output may be truncated writing up
to 12 bytes into a region of size between 6 and 18 [-Wformat-truncation=]
snprintf(temp, 24, "%d:%d/%d@%s", aka.zone, aka.net, aka.node, aka.domain);
^~ ~~~~~~~~~~ ledit.c:2131:3: note: ‘snprintf’ output between 7 and 31 bytes into a destination of size 24
snprintf(temp, 24, "%d:%d/%d@%s", aka.zone, aka.net, aka.node, aka.domain);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ m_farea.c: In function ‘CountFilearea’:
m_farea.c:84:27: warning: ‘/foobar’ directive output may be truncated writing 7 bytes into a region of size between 1 and 81 [-Wformat-truncation=]
snprintf(ffile, 81, "%s/foobar", area.Path);
^~~~~~~
m_farea.c:84:4: note: ‘snprintf’ output between 8 and 88 bytes into a destination of size 81
snprintf(ffile, 81, "%s/foobar", area.Path);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
m_fido.c: In function ‘fido_doc’:
m_fido.c:584:16: warning: passing argument 1 to restrict-qualified parameter aliases with argument 4 [-Wrestrict]
snprintf(temp, 81, "%s %d", temp, fidonet.zone[i]);
^~~~ ~~~~
m_fido.c:584:27: warning: ‘%s’ directive output may be truncated writing up
to 4095 bytes into a region of size 81 [-Wformat-truncation=]
snprintf(temp, 81, "%s %d", temp, fidonet.zone[i]);
^~ ~~~~
m_fido.c:584:26: note: directive argument in the range [1, 65535]
snprintf(temp, 81, "%s %d", temp, fidonet.zone[i]);
^~~~~~~
m_fido.c:584:7: note: ‘snprintf’ output between 3 and 4102 bytes into a destination of size 81
snprintf(temp, 81, "%s %d", temp, fidonet.zone[i]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
m_menu.c: In function ‘EditMenu’:
m_menu.c:361:38: warning: ‘%s’ directive output may be truncated writing up
to 80 bytes into a region of size between 39 and 45 [-Wformat-truncation=]
snprintf(temp, 81, "%-29s %5d %s", menus.TypeDesc,
^~
le_int(menus.MenuSecurity.level), menus.OptionalData);
~~~~~~~~~~~~~~~~~~
m_menu.c:361:8: note: ‘snprintf’ output between 37 and 123 bytes into a destination of size 81
snprintf(temp, 81, "%-29s %5d %s", menus.TypeDesc,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
le_int(menus.MenuSecurity.level), menus.OptionalData);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
m_menu.c:358:38: warning: ‘%s’ directive output may be truncated writing up
to 80 bytes into a region of size between 39 and 45 [-Wformat-truncation=]
snprintf(temp, 81, "%-29s %5d %s", menus.TypeDesc,
^~
le_int(menus.MenuSecurity.level), menus.Display);
~~~~~~~~~~~~~
m_menu.c:358:8: note: ‘snprintf’ output between 37 and 123 bytes into a destination of size 81
snprintf(temp, 81, "%-29s %5d %s", menus.TypeDesc,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
le_int(menus.MenuSecurity.level), menus.Display);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
m_menu.c: In function ‘bbs_menu_doc’:
m_menu.c:622:32: warning: ‘%s’ directive output may be truncated writing up
to 255 bytes into a region of size between 74 and 75 [-Wformat-truncation=]
snprintf(temp, 81, "menu_%s_%s.html", lang.LangKey, de->d_name);
^~
m_menu.c:622:4: note: ‘snprintf’ output between 12 and 268 bytes into a destination of size 81
snprintf(temp, 81, "menu_%s_%s.html", lang.LangKey, de->d_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
m_ngroup.c: In function ‘EditNGroup’:
m_ngroup.c:358:39: warning: ‘%-18s’ directive output may be truncated writing between 18 and 55 bytes into a region of size between 54 and 62 [-Wformat-truncation=]
snprintf(temp, 81, "%3d. %-12s %-18s", o + i, ngroup.Name, ngroup.Comment);
^~~~~
~~~~~~~~~~~~~~
m_ngroup.c:358:7: note: ‘snprintf’ output between 38 and 83 bytes into a destination of size 81
snprintf(temp, 81, "%3d. %-12s %-18s", o + i, ngroup.Name, ngroup.Comment);

^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
m_ngroup.c: In function ‘PickNGroup’:
m_ngroup.c:460:39: warning: ‘%-18s’ directive output may be truncated writing between 18 and 55 bytes into a region of size between 54 and 62 [-Wformat-truncation=]
snprintf(temp, 81, "%3d. %-12s %-18s", o + i, ngroup.Name, ngroup.Comment);
^~~~~
~~~~~~~~~~~~~~
m_ngroup.c:460:7: note: ‘snprintf’ output between 38 and 83 bytes into a destination of size 81
snprintf(temp, 81, "%3d. %-12s %-18s", o + i, ngroup.Name, ngroup.Comment);

^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
m_fdb.c: In function ‘InitFDB’:
m_fdb.c:393:8: warning: ‘strncpy’ output may be truncated copying 12 bytes from a string of length 12 [-Wstringop-truncation]
strncpy(fdb.Name, old.Name, sizeof(fdb.Name) -1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
m_fdb.c:394:8: warning: ‘strncpy’ output may be truncated copying 80 bytes from a string of length 80 [-Wstringop-truncation]
strncpy(fdb.LName, old.LName, sizeof(fdb.LName) -1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
m_fdb.c:400:6: warning: ‘strncpy’ output may be truncated copying 20 bytes from a string of length 20 [-Wstringop-truncation]
strncpy(fdb.TicArea, tic.Name, sizeof(fdb.TicArea) -1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
m_fdb.c:409:8: warning: ‘strncpy’ output may be truncated copying 35 bytes from a string of length 35 [-Wstringop-truncation]
strncpy(fdb.Uploader, old.Uploader, sizeof(fdb.Uploader) -1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ m_fdb.c:414:8: warning: ‘strncpy’ output may be truncated copying 15 bytes from a string of length 15 [-Wstringop-truncation]
strncpy(fdb.Password, old.Password, sizeof(fdb.Password) -1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ m_fdb.c:434:11: warning: ‘strncpy’ output may be truncated copying 20 bytes
from a string of length 255 [-Wstringop-truncation]
strncpy(fdb.Magic, de->d_name, sizeof(fdb.Magic) -1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
m_global.c: In function ‘global_doc’:
m_global.c:1775:25: warning: ‘%s’ directive output may be truncated writing
up to 64 bytes into a region of size between 16 and 80 [-Wformat-truncation=]
snprintf(temp, 81, "%s %s", utsbuf.sysname, utsbuf.release);
^~ ~~~~~~~~~~~~~~
m_global.c:1775:2: note: ‘snprintf’ output between 2 and 130 bytes into a destination of size 81
snprintf(temp, 81, "%s %s", utsbuf.sysname, utsbuf.release);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
m_mgroup.c: In function ‘EditMGroup’:
m_mgroup.c:536:36: warning: ‘%-18s’ directive output may be truncated writing between 18 and 55 bytes into a region of size between 54 and 62 [-Wformat-truncation=]
snprintf(temp, 81, "%3d. %-12s %-18s", o + i, mgroup.Name, mgroup.Comment);
^~~~~ ~~~~~~~~~~~~~~ m_mgroup.c:536:4: note: ‘snprintf’ output between 38 and 83 bytes into a destination of size 81
snprintf(temp, 81, "%3d. %-12s %-18s", o + i, mgroup.Name, mgroup.Comment);

^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ m_mgroup.c: In function ‘PickMGroup’:
m_mgroup.c:644:39: warning: ‘%-18s’ directive output may be truncated writing between 18 and 55 bytes into a region of size between 54 and 62 [-Wformat-truncation=]
snprintf(temp, 81, "%3d. %-12s %-18s", o + i, mgroup.Name, mgroup.Comment);
^~~~~
~~~~~~~~~~~~~~
m_mgroup.c:644:7: note: ‘snprintf’ output between 38 and 83 bytes into a destination of size 81
snprintf(temp, 81, "%3d. %-12s %-18s", o + i, mgroup.Name, mgroup.Comment);

^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
m_users.c: In function ‘Fields1’:
m_users.c:229:49: warning: ‘%02d’ directive output may be truncated writing
between 2 and 11 bytes into a region of size between 0 and 16 [-Wformat-truncation=]
snprintf(Date, 30, "%02d-%02d-%04d %02d:%02d:%02d", ld->tm_mday,
^~~~
m_users.c:229:9: note: ‘snprintf’ output between 20 and 72 bytes into a destination of size 30
snprintf(Date, 30, "%02d-%02d-%04d %02d:%02d:%02d", ld->tm_mday,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ld->tm_mon+1, ld->tm_year + 1900, ld->tm_hour, ld->tm_min, ld->tm_sec);

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~
m_users.c:234:49: warning: ‘%02d’ directive output may be truncated writing
between 2 and 11 bytes into a region of size between 0 and 16 [-Wformat-truncation=]
snprintf(Date, 30, "%02d-%02d-%04d %02d:%02d:%02d", ld->tm_mday,
^~~~
m_users.c:234:9: note: ‘snprintf’ output between 20 and 72 bytes into a destination of size 30
snprintf(Date, 30, "%02d-%02d-%04d %02d:%02d:%02d", ld->tm_mday,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ld->tm_mon+1, ld->tm_year + 1900, ld->tm_hour, ld->tm_min, ld->tm_sec);

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~
m_users.c:239:42: warning: ‘%02d’ directive output may be truncated writing
between 2 and 11 bytes into a region of size between 0 and 16 [-Wformat-truncation=]
snprintf(Date, 30, "%02d-%02d-%04d %02d:%02d:%02d", ld->tm_mday,
^~~~
m_users.c:239:2: note: ‘snprintf’ output between 20 and 72 bytes into a destination of size 30
snprintf(Date, 30, "%02d-%02d-%04d %02d:%02d:%02d", ld->tm_mday,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ld->tm_mon+1, ld->tm_year + 1900, ld->tm_hour, ld->tm_min, ld->tm_sec);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ m_ff.c: In function ‘AppendFilefind’:
m_ff.c:205:3: warning: ‘strncpy’ output may be truncated copying 50 bytes from a string of length 50 [-Wstringop-truncation]
strncpy(scanmgr.Origin, CFG.origin, 50);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
m_hatch.c: In function ‘EditHatch’:
m_hatch.c:507:33: warning: ‘%-32s’ directive output may be truncated writing between 32 and 78 bytes into a region of size between 67 and 75 [-Wformat-truncation=]
snprintf(temp, 81, "%3d. %-32s", o + i, hatch.Spec);
^~~~~ ~~~~~~~~~~
m_hatch.c:507:7: note: ‘snprintf’ output between 39 and 93 bytes into a destination of size 81
snprintf(temp, 81, "%3d. %-32s", o + i, hatch.Spec);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
m_ol.c: In function ‘CountOneline’:
m_ol.c:60:26: warning: ‘%02d’ directive output may be truncated writing between 2 and 11 bytes into a region of size between 0 and 9 [-Wformat-truncation=]
snprintf(buf, 12, "%02d-%02d-%04d", l_date->tm_mday, l_date->tm_mon+1, l_date->tm_year+1900);
^~~~
m_ol.c:60:20: note: directive argument in the range [-2147483647, 2147483647]
snprintf(buf, 12, "%02d-%02d-%04d", l_date->tm_mday, l_date->tm_mon+1, l_date->tm_year+1900);
^~~~~~~~~~~~~~~~
m_ol.c:60:20: note: directive argument in the range [-2147481748, 2147483647] m_ol.c:60:2: note: ‘snprintf’ output between 11 and 36 bytes into a destination of size 12
snprintf(buf, 12, "%02d-%02d-%04d", l_date->tm_mday, l_date->tm_mon+1, l_date->tm_year+1900);

^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~
m_ol.c: In function ‘EditOneline’:
m_ol.c:345:33: warning: ‘%-32s’ directive output may be truncated writing between 32 and 80 bytes into a region of size between 67 and 75 [-Wformat-truncation=]
snprintf(temp, 81, "%3d. %-32s", o + i, ol.Oneline);
^~~~~ ~~~~~~~~~~
m_ol.c:345:7: note: ‘snprintf’ output between 39 and 95 bytes into a destination of size 81
snprintf(temp, 81, "%3d. %-32s", o + i, ol.Oneline);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
m_ol.c: In function ‘ImportOneline’:
m_ol.c:528:29: warning: ‘%02d’ directive output may be truncated writing between 2 and 11 bytes into a region of size between 0 and 9 [-Wformat-truncation=]
snprintf(buf, 12, "%02d-%02d-%04d", l_date->tm_mday, l_date->tm_mon+1, l_date->tm_year+1900);
^~~~
m_ol.c:528:23: note: directive argument in the range [-2147483647, 2147483647]
snprintf(buf, 12, "%02d-%02d-%04d", l_date->tm_mday, l_date->tm_mon+1, l_date->tm_year+1900);
^~~~~~~~~~~~~~~~
m_ol.c:528:23: note: directive argument in the range [-2147481748, 2147483647] m_ol.c:528:5: note: ‘snprintf’ output between 11 and 36 bytes into a destination of size 12
snprintf(buf, 12, "%02d-%02d-%04d", l_date->tm_mday, l_date->tm_mon+1, l_date->tm_year+1900);

^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~
commonio.c: In function ‘commonio_lock_nowait.part.3’:
commonio.c:263:41: warning: ‘%ld’ directive output may be truncated writing
between 1 and 11 bytes into a region of size between 0 and 1023 [-Wformat-truncation=]
snprintf(file, sizeof file, "%s.%ld", db->filename, (long) getpid());
^~~
commonio.c:263:37: note: directive argument in the range [-2147483648, 2147483647]
snprintf(file, sizeof file, "%s.%ld", db->filename, (long) getpid());
^~~~~~~~
commonio.c:263:9: note: ‘snprintf’ output between 3 and 1036 bytes into a destination of size 1024
snprintf(file, sizeof file, "%s.%ld", db->filename, (long) getpid());
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ commonio.c:264:40: warning: ‘.lock’ directive output may be truncated writing 5 bytes into a region of size between 1 and 1024 [-Wformat-truncation=]
snprintf(lock, sizeof lock, "%s.lock", db->filename);
^~~~~
commonio.c:264:9: note: ‘snprintf’ output between 6 and 1029 bytes into a destination of size 1024
snprintf(lock, sizeof lock, "%s.lock", db->filename);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
commonio.c: In function ‘commonio_close.part.4’:
commonio.c:541:33: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=]
snprintf(buf, sizeof buf, "%s-", db->filename);
^
commonio.c:541:3: note: ‘snprintf’ output between 2 and 1025 bytes into a destination of size 1024
snprintf(buf, sizeof buf, "%s-", db->filename);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
commonio.c:563:32: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=]
snprintf(buf, sizeof buf, "%s+", db->filename);
^
commonio.c:563:2: note: ‘snprintf’ output between 2 and 1025 bytes into a destination of size 1024
snprintf(buf, sizeof buf, "%s+", db->filename);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
commonio.c: In function ‘commonio_unlock’:
commonio.c:339:48: warning: ‘.lock’ directive output may be truncated writing 5 bytes into a region of size between 1 and 1024 [-Wformat-truncation=]
snprintf(lock, sizeof lock, "%s.lock", db->filename);
^~~~~
commonio.c:339:17: note: ‘snprintf’ output between 6 and 1029 bytes into a destination of size 1024
snprintf(lock, sizeof lock, "%s.lock", db->filename);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
utmp.c: In function ‘checkutmp’:
utmp.c:121:3: warning: ‘strncpy’ specified bound 4 equals destination size [-Wstringop-truncation]
strncpy(utent.ut_id, utent.ut_line + 3, sizeof utent.ut_id);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
log.c: In function ‘dolastlog’:
log.c:89:2: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
strncpy(newlog.ll_line, line, sizeof newlog.ll_line);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from mblogin.c:32:
mblogin.c: In function ‘main’:
mblogin.c:541:44: warning: ‘%s’ directive output may be truncated writing up to 8191 bytes into a region of size 507 [-Wformat-truncation=]
snprintf(fromhost, sizeof fromhost, _(" on `%s' from `%s'"), tty, cp);
^~~~~~~~~~~~~~~~~~~~ mblogin.h:30:18: note: in definition of macro ‘_’
# define _(Text) Text
^~~~
mblogin.c:541:6: note: ‘snprintf’ output 15 or more bytes (assuming 8206) into a destination of size 512
snprintf(fromhost, sizeof fromhost, _(" on `%s' from `%s'"), tty, cp);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from mblogin.c:32:
mblogin.c:543:44: warning: ‘%s’ directive output may be truncated writing up to 8191 bytes into a region of size 507 [-Wformat-truncation=]
snprintf(fromhost, sizeof fromhost, _(" on `%s'"), tty);
^~~~~~~~~~
mblogin.h:30:18: note: in definition of macro ‘_’
# define _(Text) Text
^~~~
mblogin.c:543:6: note: ‘snprintf’ output between 7 and 8198 bytes into a destination of size 512
snprintf(fromhost, sizeof fromhost, _(" on `%s'"), tty);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from mblogin.c:32:
mblogin.h:179:10: warning: ‘strncpy’ argument 2 declared attribute ‘nonstring’ is smaller than the specified bound 8191 [-Wstringop-overflow=]
(strncpy((A), (B), sizeof(A) - 1), (A)[sizeof(A) - 1] = '\0')
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mblogin.c:447:5: note: in expansion of macro ‘STRFCPY’
STRFCPY(tty, utent.ut_line);
^~~~~~~
In file included from /usr/include/utmp.h:29,
from mblogin.c:49:
/usr/include/bits/utmp.h:62:8: note: argument 'ut_line' declared here
char ut_line[UT_LINESIZE]
^~~~~~~
----

A fair few are dups as far as I can tell.

Values ½~@~X and ½~@~Y are the ' char.

golded can't seem to handle UTF-8 correctly.


Vincent

--- Mageia Linux v7.1 X64/Mbse v1.0.7.17/GoldED+/LNX 1.1.5-b20180707
* Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)

Hello Vincent!

02 Dec 20 22:37, you wrote to me:

Just compiled .20 but if anything getting even more warning reports of
problems during gcc v8.4 compiles.

Work on these is still in progress. Watch for another update fairly soon.

Andrew

--- GoldED+/LNX 1.1.5-b20180707
* Origin: Phoenix BBS * phoenix.bnbbbs.net (1:320/219)