I have Binkd enabled, have my sessions configured with passwords and
hosts. When I go pull a hub, nothing happens, no binkd transfer shows up, inbound is empty. Did I miss something?.

Yes ... Canada day ...

\%/@rd

--- DB4 - Jun 14 2021
* Origin: Hou het veilig, hou vol. Het komt allemaal weer goed (2:292/854)

Yes ... Canada day ...

Yeah. Forgot about that actually.

Mark

... SX=Sexually eXtinct,also known as neutered,ergo an SX
--- Mystic BBS v1.12 A47 2021/06/20 (Windows/64)
* Origin: P.O.N.R. BBS (1:229/550)

Yes ... Canada day ...

Yeah. Forgot about that actually.

So you don't have this thing where you are celebrating the deeds of a powerful armed forces invading third world countries, bombing them to smithereens, killing over 200,000 civilians, destroying infrastructure, destabilizing the entire Middle East and calling it "Protecting Canada"?

Of course not, it's Canada ...

\%/@rd
--- DB4 - Jun 14 2021
* Origin: Hou het veilig, hou vol. Het komt allemaal weer goed (2:292/854)

So you don't have this thing where you are celebrating the deeds of a powerful armed forces invading third world countries, bombing them to smithereens, killing over 200,000 civilians, destroying infrastructure, destabilizing the entire Middle East and calling it "Protecting Canada"?

Of course not, it's Canada ..

I used to do the fireworks thing as a kid. The city asked people not to this year in light of recent events, but some didn't listen.

All coutries have there secrets,

Mark

... The world is like a cactus except the pricks are inside.
--- Mystic BBS v1.12 A47 2021/06/20 (Windows/64)
* Origin: P.O.N.R. BBS (1:229/550)

Is the nodelist compiled? When you poll a system, a "-----" entry should appear in the Queue. When D'Bridge sends the poll to BinkD the Log
window should say "BinkD transaction" for that system.

What exactly do the D'Bridge and BinkD logs say?

Nodelists are built on boot, yes. This is what I see in the DBRIDGE.log

BinkD transaction for 1:229/426

There is no Dridge binkd log created. Just says "sent to staging" in queue area.

Works if I run Binkdwin -p 1:229/426 DBRIDGE.BNK in a console window.

Mark

... Usually insane; in lucid moments merely stupid.

--- Mystic BBS v1.12 A47 2021/06/20 (Windows/64)
* Origin: P.O.N.R. BBS (1:229/550)

On 03 Jul 21 06:43:37, Mark Da Silva said the following to Nick Andre:

There is no Dridge binkd log created. Just says "sent to staging" in queue area.

Works if I run Binkdwin -p 1:229/426 DBRIDGE.BNK in a console window.

Try installing the latest update (Jul 7th) then let me know if this is resolved. If not, run DB EXPORT MARK.CFG and send to me via email or Netmail.

Nick
--- Renegade vY2Ka2
* Origin: Joey, do you like movies about gladiators? (1:229/426)

Try installing the latest update (Jul 7th) then let me know if this is resolved. If not, run DB EXPORT MARK.CFG and send to me via email or Netmail.

Nick

I installed the update. Now it won't run, tells me to ajust the window size to 80x25 (even if it's full screen), or the ntvdm crashes.

I miss the good old day's of bbsing. If I could find a way (for fee) to run my TG or PCBoard setup I would run one of those again.

Going to do a fresh install. Will update later.

Mark

... ONLINE ? Good! Hit <ALT-H> to take the I.Q. Test
--- Mystic BBS v1.12 A47 2021/06/20 (Windows/64)
* Origin: P.O.N.R. BBS (1:229/550)

On 10 Jul 21 17:04:18, Mark Da Silva said the following to Nick Andre:

I installed the update. Now it won't run, tells me to ajust the window size to 80x25 (even if it's full screen), or the ntvdm crashes.

What OS? What happens if you type MODE 80,25?

If its Windows, make sure the command-prompt has at least 25 rows.

Nick
--- Renegade vY2Ka2
* Origin: Joey, do you like movies about gladiators? (1:229/426)

I installed the update. Now it won't run, tells me to ajust the window size to 80x25 (even if it's full screen), or the ntvdm crashes.

I did the update too.
Better luck here.
Now I don't have to open iniquity after restart and init the modem prior to loading up DB. There is a slight increase of speed on the ol 486.
Also less in the log. also noticed that db doesn't try to run though the
queue after every startup.

Much improved.

Im gonna need to know where to send the 2o beers.
--- Renegade vY2Ka2
* Origin: Joey, do you like movies about gladiators? (1:229/426)

What OS? What happens if you type MODE 80,25?

If its Windows, make sure the command-prompt has at least 25 rows.

Win10 20H2, That solved it thanks.

Mark

... Good printers do it without wrinkling the sheets.

--- Mystic BBS v1.12 A47 2021/06/20 (Windows/64)
* Origin: P.O.N.R. BBS (1:229/550)

On 31 Jul 21 22:07:57, Mark Da Silva said the following to Nick Andre:

What OS? What happens if you type MODE 80,25?

If its Windows, make sure the command-prompt has at least 25 rows.

Win10 20H2, That solved it thanks.

I am convinced that DOS on Windows changed after Windows XP and not for the better.

Nick

--- Renegade vY2Ka2
* Origin: Joey, do you like movies about gladiators? (1:229/426)

Win10 20H2, That solved it thanks.

I am convinced that DOS on Windows changed after Windows XP and not for the better.

You would be righç. XP ran DOS greaç win 10 seems ço run great HOWEVER why can'ç iç be fullscreen?

--- Renegade vY2Ka2
* Origin: Joey, do you like movies abouç gladiaçors? (1:229/426)

On 31 Jul 21 23:49, Jesse C---- said the following to Nick Andre:

I am convinced that DOS on Windows changed after Windows XP and not for the better.

You would be righç. XP ran DOS greaç win 10 seems ço run great HOWEVER why can'ç iç be fullscreen?

It was something to do with changing the whole video driver system or something stupid. I used to have DB running full-screen on XP while BBS callers and all else happened in the background.

Nick
--- Renegade vY2Ka2
* Origin: Joey, do you like movies about gladiators? (1:229/426)

On 01 Aug 21 21:36:27, Mark Da Silva said the following to Nick Andre:

I am convinced that DOS on Windows changed after Windows XP and not fo the better.

I miss the good old days

I miss my Tandy 1000 sometimes,

Nick
--- Renegade vY2Ka2
* Origin: Joey, do you like movies about gladiators? (1:229/426)

I miss my Tandy 1000 sometimes,

I never had one.

You never ran D'Bridge on a Tandy-1000? And you're showing up here?

\%/@rd

9-)
--- DB4 - Jul 07 2021
* Origin: Hou het veilig, hou vol. Het komt allemaal weer goed (2:292/854)

On 03 Aug 21 21:05:37, Mark Da Silva said the following to Ward Dossche:

You never ran D'Bridge on a Tandy-1000? And you're showing up here?

That even possible? They ran DOS?

They run Tandy DOS 2.11 or 3.3 depending on the ROM level.

Nick
--- Renegade vY2Ka2
* Origin: Joey, do you like movies about gladiators? (1:229/426)

You never ran D'Bridge on a Tandy-1000? And you're showing up here?

That even possible? They ran DOS?

It was a beautiful machine ... affordable, with a 20MB hardcard. Compiling the nodelist took like 40 minutes.

\%/@rd
--- DB4 - Jul 07 2021
* Origin: Hou het veilig, hou vol. Het komt allemaal weer goed (2:292/854)

It was a beautiful machine ... affordable, with a 20MB hardcard.
Compiling the nodelist took like 40 minutes.

40 Minutes! Imagine if you had more then one network, Were they user ugradable at all?

Mark

... (A)bort, (R)etry, (S)ell it
--- Mystic BBS v1.12 A47 2021/07/31 (Windows/64)
* Origin: P.O.N.R. BBS (1:229/550)

On 07 Aug 21 20:43:10, Mark Da Silva said the following to Ward Dossche:

It was a beautiful machine ... affordable, with a 20MB hardcard. Compiling the nodelist took like 40 minutes.

40 Minutes! Imagine if you had more then one network, Were they user ugradable at all?

Somewhat. The hard-card "was" the major upgrade, and if it added the DMA controller you had slightly better speed. Depending on the model you also had to upgrade the RAM to 640k and replace the CPU with an Nec V20 for 8 mhz.

The Tandy that I had came with a then-state-of-the-art 8 bit VGA video card
and a DAC sattelite-board. There were volume/microphone controls on the front of the case. The Deskmate software had a crude but interesting music/sound composer suite. This was all before Soundblaster cards became all the rage.

Nick
--- Renegade vY2Ka2
* Origin: Joey, do you like movies about gladiators? (1:229/426)

It was a beautiful machine ... affordable, with a 20MB hardcard.
Compiling the nodelist took like 40 minutes.

40 Minutes! Imagine if you had more then one network, Were they user ugradable at all?

The problem was the HD capacity, and its speed.

The nodelist then was 7MB, when you apply the nodiff then the outcome is also 7MB. Meaning you already needed 14MB just for nodelist processing ... of a 20MB disc ... doesn't give you much leeway with othwer stuff you're doing.

\%/@rd

--- DB4 - Jul 07 2021
* Origin: Hou het veilig, hou vol. Het komt allemaal weer goed (2:292/854)

The Tandy that I had came with a then-state-of-the-art 8 bit VGA video card and a DAC sattelite-board. There were volume/microphone controls on the front of the case. The Deskmate software had a crude but interesting music/sound composer suite. This was all before Soundblaster cards
became all the rage.

How much did they retail for?

Mark

... Despite of the cost of living, it remains popular.

--- Mystic BBS v1.12 A47 2021/07/31 (Windows/64)
* Origin: P.O.N.R. BBS (1:229/550)

The nodelist then was 7MB, when you apply the nodiff then the outcome is also 7MB. Meaning you already needed 14MB just for nodelist processing
... of a 20MB disc ... doesn't give you much leeway with othwer stuff you're doing.
\%/@rd

I remember those days. I had an IBM XT with 10MB and a monochrome monitor

... HELP! I've crashed...AND I CAN'T BOOT UP!

--- Mystic BBS v1.12 A47 2021/07/31 (Windows/64)
* Origin: P.O.N.R. BBS (1:229/550)

On 11 Aug 21 21:37:56, Mark Da Silva said the following to Nick Andre:

The Tandy that I had came with a then-state-of-the-art 8 bit VGA video card and a DAC sattelite-board. There were volume/microphone controls the front of the case. The Deskmate software had a crude but interesti music/sound composer suite. This was all before Soundblaster cards became all the rage.

How much did they retail for?

Can't remember... I think like $800CDN and that was in '88... '89... plus tax.

I'm not sure if Ward remembers how much he paid for his?

The thing about Radio Shock was that you could walk in with a fistful of cash and moments later walk out with a complete computer ready to go. It didn't need a floppy drive or controller or serial/printer port card, etc.

Nick

--- Renegade vY2Ka2
* Origin: Joey, do you like movies about gladiators? (1:229/426)

How much did they retail for?

Can't remember... I think like $800CDN and that was in '88... '89... plus tax.

I'm not sure if Ward remembers how much he paid for his?

Yes ... BFr 77.000, that's 1908 Eurom that's 2804 CD$.

\%/@rd

--- DB4 - Jul 07 2021
* Origin: Hou het veilig, hou vol. Het komt allemaal weer goed (2:292/854)

Can't remember... I think like $800CDN and that was in '88... '89...
plus tax.

I'm not sure if Ward remembers how much he paid for his?

The thing about Radio Shock was that you could walk in with a fistful of cash and moments later walk out with a complete computer ready to go. It didn't need a floppy drive or controller or serial/printer port card, etc.

I see

Mark

... I may get a new computer;this one makes too many mistakes
--- Mystic BBS v1.12 A47 2021/07/31 (Windows/64)
* Origin: P.O.N.R. BBS (1:229/550)

Hi all. I am fairly new to D'Bridge and need some assistance. I am running OS/2 Warp 4 with Maximus 3 and Fastecho and of course D'Bridge. I am looking for a way to get the messages from D'Bridge to Maximus. DB will put all the incoming messages into its own filesystem as in
C:\DB\MESSAGES
I am a node off of FSX_NET so all the incoming mail goes to C:\DB\MESSAGES\FSX_FOOD
C:\DB\MESSAGES\FSX_RETRO
etc. I like the"automatic" message handling DB has but I have had to turn that off and use manual and have all the incoming packets got to DB\INBOUND and running Fastecho manually to toss the packets. What is the best way to get Db to toss the mail to Maximus and scan for new mail to send out? I have searched the documentation and do not see an example of DB tossing to a BBS. ( or I just don't understand it) How do the rest of you guys handle this? I like the built in Binkp and it works great picking up the mail from my hub. If I can't use the automatic mail handling process of DB I guess my next question is setting a batch file to run fatecho whenever Db reccieves mail. I have a mail.cmd file in my Db directory that I run to toss, scan , and pack when I am handling mail manually but will want to automate that using semaphore if possible. Thanks for any help/advice!
--- SBBSecho 3.14-Linux
* Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840)

Hello Ward!

04 Aug 2021 11:44, Ward Dossche wrote to Mark Da Silva:

You never ran D'Bridge on a Tandy-1000? And you're showing up here?

That even possible? They ran DOS?

It was a beautiful machine ... affordable, with a 20MB hardcard. Compiling the nodelist took like 40 minutes.

a1000 was faster to make that nodelists compile, it had no harddrive :=)

old jokes, msdos was easy to do in amiga os


Regards Benny

... too late to die young :)

--- Msged/LNX 6.1.2 (Linux/5.14.8-gentoo-dist (x86_64))
* Origin: gopher://fido.junc.eu/ (2:230/0)