1. Forum
  2. FidoNet
  3. BINKD

  • New Issue

    From Rick Smith@1:105/81 to All on Mon Feb 3 20:11:06 2025
    Hello All!

    My system suddenly is not working with MicroNet as it should. When I manually try to poll a downlink or my feed I see this,

    20:09 [423506] BEGIN, binkd/1.1a-115/Linux -p -P 618:300/50 /fido/etc/binkd.cfg
    ? 20:09 [423506] Cannot find domain for zone 618, assuming 'fidonet'

    I have it set in binkd.cfg and have not changed anything. My uplink reports that my system has "blocked" his AKA not sure where or how that happens but here is a snippet he sent me.

    - - Your system has locked my AKA again:

    ===
    ! 03-Feb-2025 22:08:01 mbcico[6257] Binkp: M_BSY "Secure AKA 618:618/1@micronet busy"
    ! 03-Feb-2025 22:08:01 mbcico[6257] Binkp: session handshake failed
    + 03-Feb-2025 22:08:01 mbcico[6257] Binkp: session finished, rc=121
    + 03-Feb-2025 22:08:03 mbcico[6257] Closing TCP connection, connected 3.00s
    ? 03-Feb-2025 22:08:03 mbcico[6257] Node 618:300/1@micronet is marked undialable.
    + 03-Feb-2025 22:08:03 mbcico[6257] Call to 618:300/1@micronet failed (rc=121)

    Regards,

    Rick

    ... Hmmm ... isn't BBSing just full of surprises?
    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: Awesome Net- Oregon FTN Hub - www.awesomenet.us (1:105/81)
  • From Sean Rima@2:263/1 to Rick Smith on Fri Feb 14 17:18:48 2025
    Rick Smith wrote to All <=-

    Hello All!

    My system suddenly is not working with MicroNet as it should. When I manually try to poll a downlink or my feed I see this,

    20:09 [423506] BEGIN, binkd/1.1a-115/Linux -p -P 618:300/50 /fido/etc/binkd.cfg
    ? 20:09 [423506] Cannot find domain for zone 618, assuming 'fidonet'

    I have it set in binkd.cfg and have not changed anything. My uplink reports that my system has "blocked" his AKA not sure where or how that happens but here is a snippet he sent me.


    in your config you need
    domain micronet /path/to/outbound your zone (1/2/3/4/5/6)

    then in the address line, make sure it has @micronet at the end.

    mine is 618:500/14.1@micronet (point aka)

    Sean

    ... BBBS: https://binkd.rima.ie

    --- BBBS/LiR v4.10 Toy-7
    * Origin: TCOB1: https/binkd/telnet binkd.rima.ie (2:263/1)
  • From Tommi Koivula@2:221/360 to Rick Smith on Sat Feb 15 10:18:58 2025

    03 Feb 25 20:11, Rick Smith wrote to All:

    I have it set in binkd.cfg and have not changed anything. My uplink reports that my system has "blocked" his AKA not sure where or how
    that happens but here is a snippet he sent me.

    - - Your system has locked my AKA again:

    Check your BSO for old *.?SY files. How is your "kill-old-bsy" setting in Binkd?

    === Cut ===
    #
    # Remove old .bsy/.csy files (If some are left after a system crash). It would # be wise to set this to 12h on almost any system. (Note that binkd always
    # touches .bsy's/.csy's for active sessions)
    #
    # kill-old-bsy is OFF by default.
    #
    === Cut ===

    'Tommi

    ---
    * Origin: rbb.fidonet.fi (2:221/360)
  • From Sean Rima@2:263/1 to Rick Smith on Fri Feb 21 22:14:30 2025
    Rick Smith wrote to Sean Rima <=-

    20:09 [423506] BEGIN, binkd/1.1a-115/Linux -p -P 618:300/50
    /fido/etc/binkd.cfg
    ? 20:09 [423506] Cannot find domain for zone 618, assuming
    'fidonet'

    I have it set in binkd.cfg and have not changed anything. My
    uplink reports that my system has "blocked" his AKA not sure
    where or how that happens but here is a snippet he sent me.


    in your config you need
    domain micronet /path/to/outbound your zone (1/2/3/4/5/6)

    then in the address line, make sure it has @micronet at the end.

    mine is 618:500/14.1@micronet (point aka)

    Funny thing is all that is there already... Still running some tests


    When you showed your poll, it was saying it could not find a domain for 618: there is an issue there somewhere

    Sean


    ... TCOB1: https://binkd.rima.ie

    --- BBBS/LiR v4.10 Toy-7
    * Origin: TCOB1: https/binkd/telnet binkd.rima.ie (2:263/1)
  • From Rick Smith@1:105/81 to Sean Rima on Fri Feb 21 13:49:04 2025
    Hello Sean!

    Friday February 14 2025 17:18, you wrote to me:

    * Forwarded from area 'BINKD'
    Rick Smith wrote to All <=-

    Hello All!

    My system suddenly is not working with MicroNet as it should.
    When I manually try to poll a downlink or my feed I see this,

    20:09 [423506] BEGIN, binkd/1.1a-115/Linux -p -P 618:300/50
    /fido/etc/binkd.cfg
    ? 20:09 [423506] Cannot find domain for zone 618, assuming
    'fidonet'

    I have it set in binkd.cfg and have not changed anything. My
    uplink reports that my system has "blocked" his AKA not sure
    where or how that happens but here is a snippet he sent me.


    in your config you need
    domain micronet /path/to/outbound your zone (1/2/3/4/5/6)

    then in the address line, make sure it has @micronet at the end.

    mine is 618:500/14.1@micronet (point aka)

    Funny thing is all that is there already... Still running some tests

    Regards,

    Rick

    ... Life: The space between BBSing.
    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: Awesome Net- Oregon FTN Hub - www.awesomenet.us (1:105/81)