Hi, I have a Raspberry Pico which is without any job. So I decided to do
a little project without much time.
The pico should read its temp-sensor and communicate the temp while
blinking the LED: First Figure, second figure.
23 degress (Celsius here) should be
blink blink
(pause)
blink blink blink
(wait 5 min)
But: How can I calculate the real room-temperature better? The results
are not very accurate.
But: How can I calculate the real room-temperature better? The results
are not very accurate.
Hi, I have a Raspberry Pico which is without any job. So I decided to do a little project without much time.
The pico should read its temp-sensor and communicate the temp while
blinking the LED: First Figure, second figure.
23 degress (Celsius here) should be
blink blink (pause) blink blink blink (wait 5 min)
Connected to a USB-Powercable the pico can tell my through camera what temperature is in my caravan. ;-)
But: How can I calculate the real room-temperature better? The results are not very accurate.
Hi, I have a Raspberry Pico which is without any job. So I decided to do
a little project without much time.
The pico should read its temp-sensor and communicate the temp while
blinking the LED: First Figure, second figure.
But: How can I calculate the real room-temperature better? The results
are not very accurate.
Sysop: | Coz |
---|---|
Location: | Anoka, MN |
Users: | 2 |
Nodes: | 4 (0 / 4) |
Uptime: | 30:05:38 |
Calls: | 97 |
Files: | 4,623 |
Messages: | 217,079 |