1. Forum
  2. FidoNet
  3. POINTS

  • Winpoint BinkP error

    From Alan Beck@1:229/426.36 to All on Sat Jan 30 10:34:44 2021
    Hi,

    When I poll my bossnode using BinkP within Winpoint I get the following error

    "BinkP bad address".

    I have tried everything I can think of.

    I am using the password that has been assigned to me by my Bossnode. I checked with him recently on what my passwords are.

    Everything seems fine in D'Bridge.


    Alan

    --- D'Bridge 4
    * Origin: (1:229/426.36)
  • From Alan Ianson@1:153/757.2 to Alan Beck on Sat Jan 30 15:48:10 2021
    Re: Winpoint BinkP error
    By: Alan Beck to All on Sat Jan 30 2021 10:34 am

    When I poll my bossnode using BinkP within Winpoint I get the following error

    "BinkP bad address".

    That sounds like you have a typo in the binkd addrress you are calling out to so double check that. Make sure the port you are calling out to is also correct.

    Ttyl :-),
    Al

    ... Disclaimer: Advice void where prohibitted by common sense!
    --- SBBSecho 3.12-Linux
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757.2)
  • From August Abolins@2:221/1.58 to Alan Beck on Sat Jan 30 19:10:00 2021
    Hello Alan!

    ** On Saturday 30.01.21 - 10:34, Alan Beck wrote to All:

    "BinkP bad address".

    I have tried everything I can think of.

    Check and double-check your typing? Maybe you transposed two
    letters, or numbers, or something is missing?



    --
    ../|ug

    --- OpenXP 5.0.48
    * Origin: :) :D :O :( :[ ;) 8) B) :> |I :P =) :S :B :] :\ (2:221/1.58)
  • From Martin Foster@2:310/31.3 to Alan Beck on Sun Jan 31 11:15:00 2021
    Hello Alan!

    *** Saturday 30.01.21 at 10:34, Alan Beck wrote to All:

    When I poll my bossnode using BinkP within Winpoint I get the following error

    "BinkP bad address".

    I have tried everything I can think of.

    I am using the password that has been assigned to me by my Bossnode. I checked with him recently on what my passwords are.

    Check this out .....

    Extras -> Options -> Uplinks

    Click on "Properties" at the right-hand side of the "Fidostyle Uplinks" panel. Look at the "Allgemeines" tab and where it says "Adresse", make
    sure there's a domain name(such as "fidonet"(without quotes)) in the box
    at the right-hand side of the hard-coded "@" symbol.

    Regards,
    Martin

    --- OpenXP 5.0.48
    * Origin: Bitz-Box - Bradford - UK (2:310/31.3)