installed vsio2k and it appears to work.. vmodem starts and runs no errors... However for the life of me I cannot find documentation to
have it listen for telnet ports.. Ive searched high and low, logged on
Hello Rick.
14 Nov 20 08:33, you wrote to all:
I am using v1.60 and here is my entries into config.sys. I am not sure
if 2k works the same or not, But this might get you headed in the
right direction.
REM SIO Setup
DEVICE=c:\sio\sio.sys (COM1:115200,INTERNET:3F8,4,-) (COM2:115200,INTERNET:2F8,3,-) (COM3:115200,INTERNET:3E8,4,-) (COM4:115200,INTERNET:2E8,3,-)
DEVICE=c:\sio\vsio.sys
DEVICE=c:\sio\vx00.sys
* Forwarded from area 'os2'
Hi, Rick!
I have also been looking for help with SIO2K for a long time and
the result of everything is a functional configuration so that I have
2x standard COM1 and COM2 and 2x VMODEM on COM3 and COM4.
You can find the necessary here: www.popper.cz/ecs-arcaos/Rick
Sysop: | Coz |
---|---|
Location: | Anoka, MN |
Users: | 2 |
Nodes: | 4 (0 / 4) |
Uptime: | 164:50:51 |
Calls: | 97 |
Files: | 4,618 |
Messages: | 216,496 |