• echo name display in mm

    From Andrew Alt@1:261/38 to All on Mon Aug 5 16:27:36 2019
    Hi,

    I'm using multimail 0.52. The message area echo names are truncated and wondering
    if there's a known solution for it?

    ... MultiMail, the new multi-platform, multi-format offline reader!

    --- BBBS/Li6 v4.10 Toy-4
    * Origin: Prism bbs (1:261/38)
  • From Alan Ianson@1:153/757 to Andrew Alt on Mon Aug 5 20:16:28 2019
    I'm using multimail 0.52. The message area echo names are truncated and wondering if there's a known solution for it?

    You may have better luck with BW or OMEN format offline packets, possibly QWKE packets may help also.

    Offline mail formats all came along years ago and had there limitations.

    --- BBBS/Li6 v4.10 Toy-4
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From Alan Ianson@1:153/757 to Andrew Alt on Mon Aug 5 22:57:44 2019
    Andrew Alt wrote to All <=-

    I'm using multimail 0.52. The message area echo names are truncated and wondering if there's a known solution for it?

    Your message made me curious so I downloaded a few messages to read and look it
    over in multimail.

    I downloaded an offline packet in OMEN format and it says this is the fido.linux_bbs area, the same as I see on the BBS. <<Prism BBS also supports OMEN offline packets (called grab format in BBBS) so you could try that and
    see if it works better for you.

    Ttyl :-),
    Al

    ... Software means never having to say you're finished.
    -+- MultiMail/Linux v0.52

    --- BBBS/Li6 v4.10 Toy-4
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From Dan Clough@1:123/115 to Alan Ianson on Tue Aug 6 07:46:00 2019
    Alan Ianson wrote to Andrew Alt <=-

    I'm using multimail 0.52. The message area echo names are truncated and wondering if there's a known solution for it?

    You may have better luck with BW or OMEN format offline packets,
    possibly QWKE packets may help also.

    I haven't ever used BW or OMEN format, but I can confirm that
    using QWKE packets will make the area names show properly in
    MultiMail.



    ... Apathy Error: Strike any key...or none, for that matter.
    === MultiMail/Linux v0.52
    --- SBBSecho 3.08-Linux
    * Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (1:123/115)
  • From Alan Ianson@1:153/757 to Dan Clough on Tue Aug 6 09:17:46 2019
    You may have better luck with BW or OMEN format offline packets,
    possibly QWKE packets may help also.

    I haven't ever used BW or OMEN format, but I can confirm that
    using QWKE packets will make the area names show properly in
    MultiMail.

    You are using Synchronet.. :)

    The SBBS developers have extended QWK largely. I haven't used QWK as a user for
    eons so I'm not really up on the QWK user experience but for QWK networking SBBS nodes don't need to use QWKE for longer user names and subject lines. SBBS QWK nodes can also transfer netmail and files between nodes. It's really impressive how that works.

    --- BBBS/Li6 v4.10 Toy-4
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From Andrew Alt@1:261/38 to Alan Ianson on Tue Aug 6 14:28:44 2019
    Alan Ianson wrote to Andrew Alt <=-

    I'm using multimail 0.52. The message area echo names are truncated and wondering if there's a known solution for it?

    You may have better luck with BW or OMEN format offline packets,
    possibly QWKE packets may help also.

    Thanks, Alan, I tried OMEN and that works :)

    I don't think Prism offers QWKE and I didn't even know such a thing existed. I was
    using.. I guess it was just standard QWK.

    I don't really care which format as long as it works, so I should be good with OMEN.

    --
    -Andy

    ... MultiMail, the new multi-platform, multi-format offline reader!

    --- BBBS/Li6 v4.10 Toy-4
    * Origin: Prism bbs (1:261/38)
  • From Dan Clough@1:123/115 to Alan Ianson on Tue Aug 6 19:55:00 2019
    Alan Ianson wrote to Dan Clough <=-

    You may have better luck with BW or OMEN format offline packets,
    possibly QWKE packets may help also.

    I haven't ever used BW or OMEN format, but I can confirm that
    using QWKE packets will make the area names show properly in
    MultiMail.

    You are using Synchronet.. :)

    The SBBS developers have extended QWK largely. I haven't used QWK
    as a user for
    eons so I'm not really up on the QWK user experience but for QWK networking SBBS nodes don't need to use QWKE for longer user
    names and subject lines. SBBS QWK nodes can also transfer netmail
    and files between nodes. It's really impressive how that works.

    Hmmmmm, well I only fairly recently switched to using QWKE (a
    config choice on the SBBS QWK options). Before I changed that
    (from regular QWK), I was seeing truncated subject lines and echo
    area names. So I think you have to enable QWKE in your packet
    configuration on SBBS to get those features. This was using the
    MultiMail offline reader for viewing.



    ... 2 + 2 = 5 for extremely large values of 2.
    === MultiMail/Linux v0.52
    --- SBBSecho 3.08-Linux
    * Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (1:123/115)
  • From Tony Langdon@3:633/410 to Andrew Alt on Wed Aug 7 12:12:00 2019
    On 08-05-19 16:22, Andrew Alt wrote to All <=-

    Hi,

    I'm using multimail 0.52. The message area echo names are truncated and wondering
    if there's a known solution for it?

    ... MultiMail, the new multi-platform, multi-format offline reader!

    Depends on the BBS end. If the BBS software supports QWKE or Bluewave formats, you should be able to get the full conference names. Synchronet and Mystic both support QWKE. You just have to turn it on, on the BBS end. Magicka supports both QWKE and Bluewave (pick the one you prefer in this instance). Other BBS software, I don't know

    .
    ... Political Season: Does this mean we can shoot them?!?!
    === MultiMail/Win v0.51
    --- SBBSecho 3.03-Linux
    * Origin: Freeway BBS Bendigo,Australia freeway.apana.org.au (3:633/410)
  • From Tony Langdon@3:633/410 to Alan Ianson on Wed Aug 7 12:13:00 2019
    On 08-05-19 20:09, Alan Ianson wrote to Andrew Alt <=-

    I'm using multimail 0.52. The message area echo names are truncated and wondering if there's a known solution for it?

    You may have better luck with BW or OMEN format offline packets,
    possibly QWKE packets may help also.

    QWKE is fine. I use that format with my Synchronet and Mystic boards.

    I do prefer Bluewave, where available, but QWKE works fine too.


    ... It's the little things: like little mistakes.
    === MultiMail/Win v0.51
    --- SBBSecho 3.03-Linux
    * Origin: Freeway BBS Bendigo,Australia freeway.apana.org.au (3:633/410)
  • From Andrew Alt@1:261/38 to Alan Ianson on Thu Aug 8 14:05:18 2019
    Alan Ianson wrote to Andrew Alt <=-

    I'm using multimail 0.52. The message area echo names are truncated and wondering if there's a known solution for it?

    You may have better luck with BW or OMEN format offline packets,
    possibly QWKE packets may help also.

    Offline mail formats all came along years ago and had there
    limitations.

    But how different is QWK from QWKE? On the MultiMail GitHub repo, I saw in the HISTORY that QWKE was supported, so I submitted a doc patch to mention that in the
    README and the man page. This was the reply from the maintainer:

    https://github.com/wmcbrine/MultiMail/pull/18#issuecomment-519594040


    --
    -Andy


    ... What is mind? No matter! What is matter? Never mind! - Homer S.

    --- BBBS/Li6 v4.10 Toy-4
    * Origin: Prism bbs (1:261/38)
  • From Alan Ianson@1:153/757 to Andrew Alt on Thu Aug 8 13:00:44 2019
    Andrew Alt wrote to Alan Ianson <=-

    You may have better luck with BW or OMEN format offline packets,
    possibly QWKE packets may help also.

    But how different is QWK from QWKE?

    I'm not sure exactly, I think it's an extention of QWK.

    On the MultiMail GitHub repo, I saw in the HISTORY that QWKE was supported, so I submitted a doc patch to mention that in the
    README and the man page. This was the reply from the maintainer:

    https://github.com/wmcbrine/MultiMail/pull/18#issuecomment-519594040

    I think that QWKE needs to be enabled when a QWK packet is created and that may
    not be the case with BBBS but I haven't investigated.

    A QWK packet that has QWKE enabled can have longer To:, From: and Subject: lines and possibly other things as well, like the area names.

    On the MultiMail website at sourceforge.net or wmcbrine.com/mmail there is quite a bit of info about QWK/QWKE and other supported formats that can give you a better idea than I can provide.

    Ttyl :-),
    Al

    ... My computer has EMS... Won't you help?
    -+- MultiMail/Linux v0.52

    --- BBBS/Li6 v4.10 Toy-4
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From Mark Lewis@1:3634/12 to Andrew Alt on Thu Aug 8 17:33:08 2019
    Re: echo name display in mm
    By: Andrew Alt to Alan Ianson on Thu Aug 08 2019 14:00:18

    But how different is QWK from QWKE?

    QWKE is simply an extension to QWK... the 'E' comes from "Extension"... v1.02 of the QWKE spec is the latest...

    http://bcw142.zapto.org:2380/fsx_text/qwke.txt

    that's one link to it... i'm sure there are others on other systems...

    )\/(ark
    --- SBBSecho 3.08-Linux
    * Origin: SouthEast Star Mail HUB - SESTAR (1:3634/12)
  • From Andrew Alt@1:261/38 to Mark Lewis on Fri Aug 9 15:06:24 2019
    mark lewis wrote to Andrew Alt <=-

    Re: echo name display in mm
    By: Andrew Alt to Alan Ianson on Thu Aug 08 2019 14:00:18

    But how different is QWK from QWKE?

    QWKE is simply an extension to QWK... the 'E' comes from "Extension"... v1.02 of the QWKE spec is the latest...

    http://bcw142.zapto.org:2380/fsx_text/qwke.txt

    that's one link to it... i'm sure there are others on other systems...

    )\/(ark
    --- SBBSecho 3.08-Linux
    * Origin: SouthEast Star Mail HUB - SESTAR (1:3634/12)

    Ah, ok, between this and what Al told me, I should be good. Thanks!


    --
    -Andy


    ... The number you have dailed...Nine-one-one...has been changed.
    -+- MultiMail/Linux v0.52

    --- BBBS/Li6 v4.10 Toy-4
    * Origin: Prism bbs (1:261/38)
  • From Phil Taylor@1:275/201.1 to Andrew Alt on Sat Aug 17 00:12:04 2019
    Andrew Alt wrote to Alan Ianson <=-

    Looks like you figured out what I meant by "truncated". I wasn't too
    clear on that, but yeah.. for me, fido.linux_bbs gets truncated to 'fido.linux.bb', fido.fidonet.org gets truncated to 'fido.fidonet.'

    In another messaage I just wrote, I mentioned OMEN solves that. Thanks
    for your

    I am using Mystic and Multimail and I am having the same issue with the area names is being truncated.


    ... MultiMail, the new multi-platform, multi-format offline reader!
    ___ MultiMail/Win v0.52

    --- Mystic BBS/QWK v1.12 A43 2019/03/02 (Linux/64)
    * Origin: New Mystic BBS (1:275/201.1)
  • From Alan Ianson@1:153/757 to Phil Taylor on Fri Aug 16 19:34:46 2019
    In another messaage I just wrote, I mentioned OMEN solves that. Thanks
    for your

    I am using Mystic and Multimail and I am having the same issue with the area names is being truncated.

    Mystic has a toggle on the offline download menu for QWKE, if you enable that you'll get longer message area names and other QWKE benefits.

    --- BBBS/Li6 v4.10 Toy-4
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From Alan Ianson@1:153/757 to Phil Taylor on Fri Aug 16 19:37:32 2019
    You may have better luck with BW or OMEN format offline packets,
    possibly QWKE packets may help also.

    Does the bbs format the omen format or is it the qwk mail reader?

    Yes, different BBSs support different formats. Mystic and SBBS support QWK and QWKE (enable that in SBBS for your user mail downloads also) and that will work fine for you.

    --- BBBS/Li6 v4.10 Toy-4
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From Andrew Alt@1:261/38 to Phil Taylor on Thu Aug 29 00:34:40 2019
    Phil Taylor wrote to Andrew Alt <=-

    Andrew Alt wrote to Alan Ianson <=-

    You may have better luck with BW or OMEN format offline packets,
    possibly QWKE packets may help also.

    Does the bbs format the omen format or is it the qwk mail reader?

    Hi Phil, it looked like all your questions got answered. All good?


    --
    -Andy


    ... Got my tie caught in the fax... Suddenly I was in L.A.
    -+- MultiMail/Linux v0.52

    --- BBBS/Li6 v4.10 Toy-4
    * Origin: Prism bbs (1:261/38)
  • From Phil Taylor@1:275/201.30 to Dan Clough on Sat Feb 6 19:44:16 2021
    On Tue 6-Aug-2019 2:41 , Dan Clough@1:123/115.0 said to Alan Ianson:

    I haven't ever used BW or OMEN format, but I can confirm that
    using QWKE packets will make the area names show properly in
    MultiMail.

    Is Bluewave no longer support and the registration key are available for it?


    --- CNet/5
    * Origin: 1:275/201.0 (1:275/201.30)