• update

    From Alan Ianson@1:153/757 to Rick Smith on Sat Dec 3 18:01:00 2022
    Hello All!

    still not working, one difference between working version and the two non working ones I found is that the working version was compiled perl=0 hptzip=0 and the two non working versions were compiled =1 on both?

    Where are you building husky?

    I normally run slackware and have no issues. Same on Debian and Archlinux.

    I spun up a Gentoo system recently for old times sake. It gave me a few FTBFS issues including husky, so I let it go.

    --- BBBS/Li6 v4.10 Toy-6
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From Rick Smith@1:105/85 to All on Wed Dec 21 08:22:16 2022
    Greetings All!

    I realized I didnt share what it is happening here is my hpt config as it pertains to nodelists etc.

    #NODELISTS
    nodelist NODELIST
    nodelistdir \ftn\nodelist
    FullUpdate \ftn\filebase\fido\nodelist\nodelist
    DiffUpdate \ftn\filebase\fido\nodediff\nodediff
    Fidouserlist FIDOUSER.LST
    NodelistFormat Standard

    Here is a piece of nltools.log after running nlupd

    ---------- Wed 21 Dec 2022, nlupdate/os2-emx 1.9 2022-02-11

    P 08:21:30 Scan directory \ftn\filebase\fido\nodelist\ for nodelist
    a 08:21:30 Found: NODELIST.Z01
    a 08:21:30 Found: NODELIST.Z08
    a 08:21:30 Found: NODELIST.Z15
    a 08:21:30 Found: NODELIST.Z17
    a 08:21:30 Found: NODELIST.Z22
    a 08:21:30 Found: NODELIST.Z24
    a 08:21:30 Found: NODELIST.Z29

    list is longer but it finds them all....


    08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
    08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z66
    08:21:31 try_full_update()
    08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
    08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z73
    08:21:31 try_full_update()
    08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
    08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z80
    08:21:31 try_full_update()
    08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
    08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z87
    08:21:31 try_full_update()
    08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
    08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z94
    08:21:31 try_full_update()
    08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
    08:21:31 \ftn\nodelist\NODELIST.231 is more than two weeks old, but still no 08:21:31 ../src/nlupdate.c::process() done
    08:21:31 End

    Executing 'unzip -j -Loqq \ftn\filebase\fido\nodelist\NODELIST.Z38
    Unpacker returned exit code '9'
    Uncompress failed
    Uncomressed filename: (null)


    ----
    Regards,


    Rick Smith (Nitro)

    ... TAGLINES.BBS Taglines About BBSing
    --- GoldED+/OS2 1.1.52220220504
    * Origin: ----> OS/2 test system (1:105/85)
  • From Alan Ianson@1:153/757.2 to Rick Smith on Wed Dec 21 10:03:58 2022
    Hello Rick,

    Executing 'unzip -j -Loqq \ftn\filebase\fido\nodelist\NODELIST.Z38 Unpacker returned exit code '9'
    Uncompress failed
    Uncomressed filename: (null)

    It looks like unzip failed for some reason, maybe it couldn't find your nodelist. Is it installed?

    Once you have an uncompressed nodelist in your nodelist directory you can run "ulc" to create/update your fidouser.lst

    Ttyl :-),
    Al

    ... @/home/alan/mmail/taglines
    --- GoldED+/LNX 1.1.5-b20220504
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757.2)
  • From Wilfred van Velzen@2:280/464 to Rick Smith on Wed Dec 21 19:31:04 2022
    Hi Rick,

    On 2022-12-21 08:22:16, you wrote to All:

    Executing 'unzip -j -Loqq \ftn\filebase\fido\nodelist\NODELIST.Z38
    ^
    I don't know if this is relevant, but I only see an opening ' no closing one...

    Unpacker returned exit code '9'
    Uncompress failed
    Uncomressed filename: (null)
    ^^- Does it really say that?

    Anyway, exit code 9 in the linux unzip is:

    9 the specified zipfiles were not found.

    Have you tried it without the -L ?
    And maybe loose the qq and add a v while you are still trying to find out what the problem is...


    Bye, Wilfred.

    --- FMail-lnx64 2.1.0.18-B20170815
    * Origin: FMail development HQ (2:280/464)
  • From Vincent Coen@2:250/1 to Rick Smith on Thu Dec 22 00:31:30 2022
    Hello Rick!

    Wednesday December 21 2022 08:22, you wrote to All:

    Might not be it but remove the '-Logg' from the command line.

    Here with unzip (Info-ZIP 6.1c25-Beta), -L does not exist, nor with zip (v3.0).

    Vince


    Greetings All!

    I realized I didnt share what it is happening here is my hpt config as
    it pertains to nodelists etc.

    #NODELISTS
    nodelist NODELIST
    nodelistdir \ftn\nodelist
    FullUpdate \ftn\filebase\fido\nodelist\nodelist
    DiffUpdate \ftn\filebase\fido\nodediff\nodediff
    Fidouserlist FIDOUSER.LST
    NodelistFormat Standard

    Here is a piece of nltools.log after running nlupd

    ---------- Wed 21 Dec 2022, nlupdate/os2-emx 1.9 2022-02-11

    P 08:21:30 Scan directory \ftn\filebase\fido\nodelist\ for nodelist
    a 08:21:30 Found: NODELIST.Z01
    a 08:21:30 Found: NODELIST.Z08
    a 08:21:30 Found: NODELIST.Z15
    a 08:21:30 Found: NODELIST.Z17
    a 08:21:30 Found: NODELIST.Z22
    a 08:21:30 Found: NODELIST.Z24
    a 08:21:30 Found: NODELIST.Z29

    list is longer but it finds them all....


    08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
    08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z66
    08:21:31 try_full_update()
    08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
    08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z73
    08:21:31 try_full_update()
    08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
    08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z80
    08:21:31 try_full_update()
    08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
    08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z87
    08:21:31 try_full_update()
    08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
    08:21:31 Checking \ftn\filebase\fido\nodelist\NODELIST.Z94
    08:21:31 try_full_update()
    08:21:31 try_full_update() failed (fulllist->julians[j]==-1)
    08:21:31 \ftn\nodelist\NODELIST.231 is more than two weeks old, but
    still no
    08:21:31 ../src/nlupdate.c::process() done
    08:21:31 End

    Executing 'unzip -j -Loqq \ftn\filebase\fido\nodelist\NODELIST.Z38
    Unpacker returned exit code '9'
    Uncompress failed
    Uncomressed filename: (null)


    ----
    Regards,


    Rick Smith (Nitro)

    ... TAGLINES.BBS Taglines About BBSing


    Vincent

    --- Mageia Linux v8 X64/Mbse v1.0.8/GoldED+/LNX 1.1.5-b20180707
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
  • From Tommi Koivula@2:221/360 to Vincent Coen on Thu Dec 22 20:24:28 2022

    22 Dec 22 00:31, Vincent Coen wrote to Rick Smith:

    Here with unzip (Info-ZIP 6.1c25-Beta), -L does not exist, nor with zip (v3.0).

    It is there in 6.00.

    'man unzip':

    === Cut ===

    -L convert to lowercase any filename originating on an uppercase-
    only operating system or file system. (This was unzip's default
    behavior in releases prior to 5.11; the new default behavior is
    identical to the old behavior with the -U option, which is now
    obsolete and will be removed in a future release.) Depending on
    the archiver, files archived under single-case file systems
    (VMS, old MS-DOS FAT, etc.) may be stored as all-uppercase
    names; this can be ugly or inconvenient when extracting to a
    case-preserving file system such as OS/2 HPFS or a case-sensi-
    tive one such as under Unix. By default unzip lists and ex-
    tracts such filenames exactly as they're stored (excepting trun-
    cation, conversion of unsupported characters, etc.); this option
    causes the names of all files from certain systems to be con-
    verted to lowercase. The -LL option forces conversion of every
    filename to lowercase, regardless of the originating file sys-
    tem.
    === Cut ===

    'Tommi

    --- hpt/os2-wc 1.9 2022-12-17
    * Origin: rbb.fidonet.fi (2:221/360)
  • From Tommi Koivula@2:221/360 to Wilfred van Velzen on Fri Dec 23 07:54:22 2022
    Hi Wilfred.

    21 Dec 22 19:31, you wrote to Rick Smith:

    Unpacker returned exit code '9'
    Uncompress failed
    Uncomressed filename: (null)
    ^^- Does it really say that?

    tommi@kco:~/husky$ grep -r Uncomressed *
    nltools/src/nlupdate.c: w_log( LL_FILENAME, "Uncomressed filename: %s", ufn );

    Yes. :)

    'Tommi

    --- GoldED+/LNX 1.1.5-b20220409
    * Origin: Linux 5.15.76-v7+ armv7l (2:221/360)
  • From Michael Dukelsky@2:5020/1042 to Tommi Koivula on Fri Dec 23 12:47:14 2022
    Hello Tommi,

    Friday December 23 2022, Tommi Koivula wrote to Wilfred van Velzen:

    Unpacker returned exit code '9'
    Uncompress failed
    Uncomressed filename: (null)
    ^^- Does it really say that?

    tommi@kco:~/husky$ grep -r Uncomressed *
    nltools/src/nlupdate.c: w_log( LL_FILENAME, "Uncomressed filename:
    %s", ufn );

    Yes. :)

    Fixed.

    Michael

    ... node (at) f1042 (dot) ru
    --- GoldED+/LNX 1.1.5-b20180707
    * Origin: Moscow, Russia (2:5020/1042)
  • From Rick Smith@1:105/81 to Wilfred van Velzen on Fri Dec 30 22:23:56 2022
    Hello Wilfred!

    Wednesday December 21 2022 19:31, you wrote to me:

    * Forwarded from area 'FIDOSOFT.HUSKY'
    Hi Rick,

    On 2022-12-21 08:22:16, you wrote to All:

    Executing 'unzip -j -Loqq
    \ftn\filebase\fido\nodelist\NODELIST.Z38
    ^
    I don't know if this is relevant, but I only see an opening ' no
    closing one...

    Unpacker returned exit code '9'
    Uncompress failed
    Uncomressed filename: (null)

    Have you tried it without the -L ?
    And maybe loose the qq and add a v while you are still trying to find
    out what the problem is...

    I tried as you suggested and it works as it should now, thank you kindly.

    Regards,

    Rick

    ... BBSing is irrelevant. You will be assimilated. --Sysop of Borg
    --- GoldED+/LNX 1.1.5-b20220504
    * Origin: Awesome Net- Oregon FTN Hub - www.awesomenet.us (1:105/81)
  • From Benny Pedersen@2:230/0 to Alan Ianson on Wed Feb 15 01:56:44 2023
    Hello Alan!

    03 Dec 2022 18:01, Alan Ianson wrote to Rick Smith:

    Hello All!

    still not working, one difference between working version and the two
    non working ones I found is that the working version was compiled perl=0
    hptzip=0 and the two non working versions were compiled =1 on both?

    Where are you building husky?

    I normally run slackware and have no issues. Same on Debian and Archlinux.

    I spun up a Gentoo system recently for old times sake. It gave me a
    few FTBFS issues including husky, so I let it go.

    what is this ?

    i have husky ebuilds for cvs version of husky, basicly i need to migrade ebuilds to git, just not done aslong i have cvs version stable, but wait till its crashes is to late aswell :)

    if you know gentoo you know where to find fidonet overlay in eselect or layman, and note master is in rsync, but mirror is in git, where all my ebuilds is qa tested bad or good :)

    google fidonet overlay


    Regards Benny

    ... too late to die young :)

    --- Msged/LNX 6.1.2 (Linux/6.1.11-gentoo-dist (x86_64))
    * Origin: gopher://fido.junc.eu/ (2:230/0)
  • From Alan Ianson@1:153/757 to Benny Pedersen on Tue Feb 14 19:08:36 2023
    I spun up a Gentoo system recently for old times sake. It gave me a
    few FTBFS issues including husky, so I let it go.

    what is this ?

    FTBFS?

    Fails to build from source.

    i have husky ebuilds for cvs version of husky, basicly i need to migrade ebuilds to git, just not done aslong i have cvs version stable, but wait till its crashes is to late aswell :)

    I grab the husky source with git on github when I need it.

    https://github.com/huskyproject

    if you know gentoo you know where to find fidonet overlay in eselect or layman and note master is in rsync, but mirror is in git, where all my ebuilds is qa tested bad or good :)

    I don't know gentoo that well but when I get a chance I'll look that up.

    google fidonet overlay

    Do you have an ebuild for golded? That is one I tried on gentoo but it fails to build from source. I think it just needs a change in the makefile for gentoo perhaps, but I couldn't find a way to build it successfully.

    --- BBBS/Li6 v4.10 Toy-6
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)